BRCQM - ULTRATHERM BLOWING WOOL
- MSDS: BRCQM
- Manufacturer: CERTAIN TEED CORP
- Product Name: ULTRATHERM BLOWING WOOL
- National Stock Number: 5640-00F027458
Product Identification
Product ID:ULTRATHERM BLOWING WOOL
MSDS Date:07/01/1991
FSC:5640
NIIN:00F027458
MSDS Number: BRCQM
Responsible Party
VALLEY FORGE, PA 19482
US
Emergency Phone: 215-341-7677/215-341-7000
Info Phone: 215-341-7677/215-341-7000
Cage: 89638
Contractor
Telephone: 215-341-7806
Cage: 89638
Ingredients
UREA EXTENDED PHENOL FORMALDEHYDE RESIN CURED *93-1*
CAS: 25104-55-6
Fraction By Weight: 3-7%
ASPHALT FUMES, ASPHALT, CUTBACK ASPHALT
CAS: 8052-42-4
RTECS: CI9900000
Fraction By Weight: 0-17%
ACGIH TLV: 5 MG/CUM
FIBROUS (FIBER) GLASS, OXIDE GLASS, GLASS FIBERS
RTECS: LK3651000
Fraction By Weight: 78-97%
OSHA PEL 15 MG/CUM
ACGIH TLV: 10 MG/CUM
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: UPPER RESPIRATORY
IRRITATION, & POSSIBLE LUNG CANCER. EYES/SKIN: IRRITATION.
Explanation of Carcinogenicity:SEE INGREDIENT
Effects of Overexposure:INHALATION: POSSIBLE LUNG CANCER.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. ADMINISTER OXYGEN IF
BREATHING IS DIFFICULT. EYES: FLUSH W/WATER FOR AT LEAST 15 MINS.
SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Extinguishing Media:USE THAT WHICH IS APPLICABLE TO SURROUNDING FIRE.
Fire Fighting Procedures:FACINGS ON THIS PRODUCT MAY BURN. TREAT AS
RESIDENTIAL BUILDING MATERIALS.
Accidental Release
Spill Release Procedures:VACUUM DUST DEPOSITS OR USE WET METHODS.
Handling
Handling and Storage Precautions:STORE UNDER COVER TO PROTECT PRODUCT.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS WHEN
HANDLING & APPLYING FIBER GLASS INSULATION. DUST RESPIRATORY TYPES:
3M MODEL #8710 OR #9900 OR MSA ULTRA TWIN FULL FACE RESPIRATOR
W/TYPE H FILTER (HEPA).
Ventilation:GENERAL &/OR LOCAL TO CONTROL AIRBORNE DUST LEVELS BELOW
EXPOSURE LIMITS
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES, SAFETY GLASSES OR FACE MASK
Other Protective Equipment:LONG SLEEVES & CAP
Work Hygienic Practices:REMOVE/LAUNDER CLOTHES SEPARATELY & RINSE
WASHER AFTER USE. BATHE W/SOAP & WARM WATER.
Supplemental Safety and Health
DECOMPOSITION PRODUCTS (CONT'D): CARBON-HYDROGEN-NITROGEN &
NITROGEN-OXYGEN COMPOUNDS. CAS NUMBER 8052-42-4, ASPHALT IS
CONTAINED IN FACED PRODUCTS ONLY.
Chemical Properties
Boiling Pt:B.P. Text:>2550F
Melt/Freeze Pt:M.P/F.P Text:2250F
Spec Gravity:2.5
Solubility in Water:SLIGHT
Appearance and Odor:YELLOW FIBERS ASSEMBLED INTO BLANKETS OR LOOSE FILL
W/FAINT RESIN ODOR
Stability
Stability Indicator/Materials to Avoid:YES
HYDROFLUORIC ACID
Hazardous Decomposition Products:TOXIC FUMES, SMOKE CONTAINING CO2,
HYDROGEN CHLORIDE, CO, MOLECULAR FRAGMENTS OF HYDROCARBON
PARTICLES, SEE SUPP
Disposal
Waste Disposal Methods:SCRAP MATERIAL SHOULD BE DISPOSED OF IN A
SANITARY LANDFILL IN ACCORDANCE W/FEDERAL, STATE, & LOCAL
REGULATIONS. WASTE IS NOT HAZARDOUS AS DEFINED BY RCRA.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.